Attaching Motor Arms

Reference the diagram below for the motor order:

Steps:

1. Apply Blue 243 Loctite to the threads on Arm Bracket B (on Motor Arm)

​​2. Slide Arm Bracket B between the bearing pockets on Arm Bracket A​​

3. Use a M5x18 Stainless Steel Shoulder Screw on the top of the Arm Receptacle, through the bearing. Do not tighten all the way​.

4. Use a M5x18 Stainless Steel Shoulder Screw on the bottom of the Arm Receptacle, through the bearing. Do not tighten all the way.

5. Pull the knob upwards, align the pin with the motor arm, and then push the knob down to secure.

ALWAYS ensure the knob is all the way down and flush against the mount!

6. Tighten both top and bottom bolts to 40 in-lbs.

​7. Repeat Steps 1-6 on each Motor Arm

PreviousAssembling PRISMNextInstalling Propellers

Last updated