Radio Calibration

To calibrate any radio compatible with PRISM Lite, you'll need the PRISM Lite QGroundControl application. Calibration is only essential when pairing a new radio with your PRISM Lite. If you purchased your PRISM Lite with a radio, it's already calibrated and mapped for you.

1. Power on PRISM Lite and connect via the USB-C port in the rear of the aircraft to allow you to activate the radio

2. Once connected, launch PRISM Lite QGroundControl software and navigate to Vehicle Setup>Radio

3. Adjust the transmitter mode setting to correspond with your radio's specific configuration. This ensures that the software accurately reflects the correct joystick movements for calibration

4. Follow the prompts by movingf the joysticks to the displayed positions.

5. Confirm each step by pressing "Next"

6. Continue this for all indicated positions.

7. Adjust other control switches and knobs across their full spectrum and visually track these movements on the Channel Monitor.

8. Once complete, click "Next" to finalize and store your configurations.