Attaching Motor Arms

Reference the diagram below for the motor order:

Steps:

1. Apply Blue 243 Loctite to the threads on Arm Bracket B (on Motor Arm)

​​2. Slide Arm Bracket B between the bearing pockets on Arm Bracket A​​

3. Use a M5x18 Stainless Steel Shoulder Screw on the top of the Arm Receptacle, through the bearing. Do not tighten all the way​.

4. Use a M5x18 Stainless Steel Shoulder Screw on the bottom of the Arm Receptacle, through the bearing. Do not tighten all the way.

5. Lock the Motor Arms with the Arm Latch

6. Tighten both top and bottom bolts to 40 in-lbs.

​7. Repeat Steps 1-6 on each Motor Arm

PreviousAccessing the Spectrum Scanner ToolNextInstalling Propellers

Last updated