PRISM Carry Handle

The PRISM Carry Handle was created for users to easily carry PRISM when not in use. It attaches to the PRISM Quick Release Payload Receptacle, which is generally attached to the top of the aircraft and typically holds the batteries.

PRISM Carry Handle Installed on the Quick Release Payload Receptacle

To Install:

• Slide the PRISM Carry Handle onto the PRISM Quick Release Receptacle. Slide it all the way onto the receptacle until the spring loaded pin engages, which secures the handle to the receptacle.

PRISM Carry Handle Installation

Properly Secured. Ensure the Spring Loaded Pin is Locked Behind the Plate

To Remove

• Pull up on the spring loaded pin, and remove from the Quick Release Receptacle

Storage

The PRISM Carry Handle may easily be stored in the upper foam tray of the PRISM travel case.

NOTE: The Carry Handle must be removed in order for the drone to travel securely in the PRISM travel case. Simply load the drone into the bottom of the case, then remove the handle and store in the upper case until it is time to remove the drone from the case again.

As of June 1, all PRISM aircraft shipped include the carry handle