PRISM Extended Landing Gear Set

The PRISM Extended landing gear set allows the drone to sit an additional ~2.75" inches off of the ground. This now provides a 15" clearance between the bottom of the 12mm payload rail and the ground.

Stock landing gear (Left), Extended landing gear (Right)

For ease of shipping, the landing gear may be disassembled.

To Assemble the Extended Landing Gear set:

1. Apply some blue threadlocker (Loctite 242 or 243 is acceptable) to each of the m3x8 bolts.

2. Insert the carbon fiber tube into place

3. Tighten each of the four bolts with an m2.5 Allen hex wrench. It may be useful to have a ball wrench to help tighten the bolts that are closest to the long carbon fiber tube.

4. Repeat for the second landing gear set.

Use Blue Threadlocker and a m2.5 Hex Wrench to assemble

Insert the Carbon Fiber tube into place and secure four m3x8 bolts using blue thread locker.

Tighten bolts into place.