PRISM External GPS Folding Mount

This section provides instructions for installing the External GPS Folding Mount on PRISM.

The PRISM External GPS Folding Mount consists of the folding GPS Mount, an SMA cable, and a Tallysman Wireless Antenna (pt#: 3-HC977-35).

Assembly:

1. Install the antenna mount on PRISM with two M4x8 captive bolts on the front panel. Make sure it is in the right position.
2. Plug the SMA connector into LiDAR sensor port (LiDAR sensor not included).

3. Ensure all hanging cables have been secured with Velcro or Zip Ties.

The antenna can be folded by pulling outwards and pushing towards the rear of aircraft. If it is too tight or too loose, adjust screw to change tension in the spring. When in the folded position, the aircraft and external GPS can fit safely in the travel case.

Location of screw to adjust spring tension for folding

PRISM External GPS in folded position.